WELDAPULLEYS®
WELDAPULLEYS® fit G&G standard WELDAHUBS®.
NOTE: It is recommended to weld 4-1/2" diameter and under WELDAPULLEYS® on both sides. We recommend using Low Hydrogen Electrodes to weld all WELDA® parts. Click here if you would like them furnished factory welded.
Belt Dimensions
AB Combination Pressed Steel
(Fits either A or B V-Belts) *Made from bar stock
| Stock No. | Outside Dia. | Hub Series | Wt. Lbs. |
| 00710025* | 2-1/2 | V | 0.25 |
| 00710030* | 3 | V | 0.25 |
| 00720035 | 3-1/2 | W | 0.50 |
| 00720040 | 4 | W | 0.38 |
| 00720045 | 4-1/2 | W | 0.50 |
| 00720050 | 5 | W | 0.69 |
| 00720055 | 5-1/2 | W | 0.94 |
| 00720060 | 6 | W | 1.00 |
| 00720065 | 6-1/2 | W | 1.06 |
| 00720070 | 7 | W | 1.19 |
| 00720080 | 8 | W | 1.50 |
| 00720090 | 9 | W | 1.94 |
| 00720100 | 10 | W | 2.56 |
| 00720110 | 11 | W | 2.56 |
| 00720120 | 12 | W | 3.38 |
| 00720140 | 14 | W | 4.63 |
| 00720160 | 16 | W | 5.83 |
OA Combination Pressed Steel
(Fits either O or A V-Belts)
| Stock No. | Outside Dia. | Hub Series | Wt. Lbs. |
| 0072A035 | 3-1/2 | W | .50 |
| 0072A040 | 4 | W | .38 |
| 0072A045 | 4-1/2 | W | .50 |
| 0072A055 | 5-1/2 | W | .94 |
| 0072A060 | 6 | W | 1.00 |
| 0072A065 | 6-1/2 | W | 1.06 |
| 0072A070 | 7 | W | 1.19 |
| 0072A080 | 8 | W | 1.50 |
| 0072A090 | 9 | W | 1.94 |
| 0072A100 | 10 | W | 2.56 |
| 0072A110 | 11 | W | 2.56 |
| 0072A120 | 12 | W | 3.38 |
| 0072A140 | 14 | W | 4.63 |
Pressed Steel WELDAPULLEYS® are designed for fractional HP applications only.
Manufactured in the USA by G&G Manufacturing Company.