Standard Non-Stock Roller Chain Sprockets

No. 35 - 3/8" Pitch

Roller Chain Sprocket No. 35

Type B

No. Teeth Sprocket No. Max. Bore^^ Outside Dia. Hub Style
Dia. LTB
10 35B10 1/2 1.379 1* 3/4 S
11 35B11 9/16 1.502 1-1/16* 3/4 S
12 35B12 5/8 1.625 1-7/32* 3/4 S
13 35B13 11/16 1.746 1-1/8 3/4 S
14 35B14 13/16 1.868 1-1/4 3/4 S
15 35B15 7/8 1.989 1-3/8 3/4 S
16 35B16 15/16 2.110 1-1/2 3/4 S
17 35B17 1-1/16 2.231 1-5/8 3/4 S
18 35B18 1-3/16 2.352 1-3/4 3/4 S
19 35B19 1-1/4 2.472 1-13/16 3/4 S
20 35B20 1-5/16 2.593 1-15/16 7/8 S
21 35B21 1-7/16 2.713 2-1/16 7/8 S
22 35B22 1-9/16 2.833 2-3/16 7/8 S
23 35B23 ** 2.953 ** 7/8 E
24 35B24 ** 3.074 ** 7/8 E
25 35B25 ** 3.194 ** 7/8 E
26 35B26 ** 3.314 ** 7/8 E
27 35B27 ** 3.434 ** 7/8 E
28 35B28 ** 3.553 ** 7/8 E
29 35B29 ** 3.673 ** 7/8 E
30 35B30 ** 3.793 ** 7/8 E
32 35B32 ** 4.032 ** 7/8 E
35 35B35 ** 4.392 ** 7/8 E
36 35B36 ** 4.511 ** 7/8 E
40 35B40 ** 4.990 ** 7/8 E
45 35B45 ** 5.588 ** 7/8 E
48 35B48 ** 5.946 ** 7/8 E
54 35B54 ** 6.664 ** 7/8 E
60 35B60 ** 7.381 ** 7/8 E
72 35B72 ** 8.814 ** 7/8 E
84 35B84 ** 10.247 ** 7/8 E
96 35B96 ** 11.680 ** 7/8 E

* Has recessed groove in hub for chain clearance. 
^^Maximum bore sizes shown allow for standard keyway and set screw over keyway. Slightly larger bores are available with no keyway, shallow keyway, or setscrew at 90 degrees to keyway.
** Hub O.D. to be determined by bore size and chain clearance.

Chain Data
Size #35
Pitch 3/8"
Roller Width 3/16"
Roller Diameter .200

Sprockets can be quoted in various bore sizes or styles with non standard or timed keyways and hardened teeth (hardness will be Rockwell “C” 35-45). Bore sizes and hub diameters larger than the standards specified are available. Specify requirements when quoting or ordering. Welded construction (Style E) sprockets can be produced as solid construction. We can manufacture any of the sizes shown as multi-strand sprockets, or we have tooling to make larger single or multi-strand sprockets up to 48" in diameter.


No. 41 - 1/2" Pitch

Roller Chain Sprocket No. 41

Type B

No. Teeth Sprocket No. Max. Bore^^ Outside Dia. Hub Style
Dia. LTB
9 41B9 5/8 1.674 1-1/8* 7/8 S
10 41B10 3/4 1.839 1-1/4* 7/8 S
11 41B11 7/8 2.003 1-7/16* 7/8 S
12 41B12 1 2.166 1-5/8* 7/8 S
13 41B13 1-1/8 2.329 1-3/4* 7/8 S
14 41B14 1-3/16 2.491 1-11/16 7/8 S
15 41B15 1-1/4 2.653 1-7/8 7/8 S
16 41B16 1-3/8 2.814 2 7/8 S
17 41B17 1-1/2 2.975 2-1/8 7/8 S
18 41B18 1-5/8 3.136 2-5/16 7/8 S
19 41B19 1-3/4 3.297 2-1/2 7/8 S
20 41B20 1-7/8 3.457 2-5/8 1 S
21 41B21 2-1/4 3.618 2-3/4 1 S
22 41B22 2-1/4 3.778 2-3/4 1 S
23 41B23 2-1/4 3.938 2-3/4 1 S
24 41B24 ** 4.098 ** 1 E
25 41B25 ** 4.258 ** 1 E
26 41B26 ** 4.418 ** 1 E
27 41B27 ** 4.578 ** 1 E
28 41B28 ** 4.738 ** 1 E
29 41B29 ** 4.898 ** 1 E
30 41B30 ** 5.057 ** 1 E
32 41B32 ** 5.377 ** 1 E
35 41B35 ** 5.856 ** 1 E
36 41B36 ** 6.015 ** 1 E
40 41B40 ** 6.653 ** 1 E
42 41B42 ** 6.972 ** 1 E
45 41B45 ** 7.451 ** 1 E
48 41B48 ** 7.927 ** 1 E
54 41B54 ** 8.885 ** 1 E
60 41B60 ** 9.841 ** 1 E
70 41B70 ** 11.434 ** 1 E
72 41B72 ** 11.752 ** 1 E

* Has recessed groove in hub for chain clearance. 
^^Maximum bore sizes shown allow for standard keyway and set screw over keyway. Slightly larger bores are available with no keyway, shallow keyway, or setscrew at 90 degrees to keyway.
** Hub O.D. to be determined by bore size and chain clearance.

Chain Data
Size #41
Pitch 1/2"
Roller Width 1/4"
Roller Diameter .306

Sprockets can be quoted in various bore sizes or styles with non standard or timed keyways and hardened teeth (hardness will be Rockwell “C” 35-45). Bore sizes and hub diameters larger than the standards specified are available. Specify requirements when quoting or ordering. Welded construction (Style E) sprockets can be produced as solid construction. We can manufacture any of the sizes shown as multi-strand sprockets, or we have tooling to make larger single or multi-strand sprockets up to 48" in diameter.


No. 40 - 1/2" Pitch

Roller Chain Sprocket No. 40

Type B

No. Teeth Sprocket No. Max. Bore^^ Outside Dia. Hub Style
Dia. LTB
9 40B9 5/8 1.674 1-1/8* 7/8 S
10 40B10 3/4 1.839 1-1/4* 7/8 S
11 40B11 7/8 2.003 1-7/16* 7/8 S
12 40B12 1 2.166 1-5/8* 7/8 S
13 40B13 1-1/8 2.329 1-3/4* 7/8 S
14 40B14 1-3/16 2.491 1-11/16 7/8 S
15 40B15 1-1/4 2.653 1-7/8 7/8 S
16 40B16 1-3/8 2.814 2 7/8 S
17 40B17 1-1/2 2.975 2-1/8 7/8 S
18 40B18 1-5/8 3.136 2-19/64 7/8 S
19 40B19 1-3/4 3.297 2-1/2 7/8 S
20 40B20 1-7/8 3.457 2-5/8 1 S
21 40B21 2-1/4 3.618 2-3/4 1 S
22 40B22 2-1/4 3.778 2-3/4 1 S
23 40B23 2-1/4 3.938 2-3/4 1 S
24 40B24 ** 4.098 ** 1 E
25 40B25 ** 4.258 ** 1 E
26 40B26 ** 4.418 ** 1 E
27 40B27 ** 4.578 ** 1 E
28 40B28 ** 4.738 ** 1 E
29 40B29 ** 4.898 ** 1 E
30 40B30 ** 5.057 ** 1 E
32 40B32 ** 5.377 ** 1 E
35 40B35 ** 5.856 ** 1 E
36 40B36 ** 6.015 ** 1 E
38 40B38 ** 6.334 ** 1 E
40 40B40 ** 6.653 ** 1 E
42 40B42 ** 6.972 ** 1 E
45 40B45 ** 7.451 ** 1 E
46 40B46 ** 7.609 ** 1 E
48 40B48 ** 7.927 ** 1-1/8 E
54 40B54 ** 8.885 ** 1-1/8 E
60 40B60 ** 9.841 ** 1-1/8 E
70 40B70 ** 11.434 ** 1-1/8 E
72 40B72 ** 11.752 ** 1-1/8 E
80 40B80 ** 13.026 ** 1-1/4 E
84 40B84 ** 13.663 ** 1-1/4 E
96 40B96 ** 15.573 ** 1-1/4 E

* Has recessed groove in hub for chain clearance. 
^^Maximum bore sizes shown allow for standard keyway and set screw over keyway. Slightly larger bores are available with no keyway, shallow keyway, or setscrew at 90 degrees to keyway.
** Hub O.D. to be determined by bore size and chain clearance.

Chain Data
Size #40
Pitch 1/2"
Roller Width 5/16"
Roller Diameter .312

Sprockets can be quoted in various bore sizes or styles with non standard or timed keyways and hardened teeth (hardness will be Rockwell “C” 35-45). Bore sizes and hub diameters larger than the standards specified are available. Specify requirements when quoting or ordering. Welded construction (Style E) sprockets can be produced as solid construction. We can manufacture any of the sizes shown as multi-strand sprockets, or we have tooling to make larger single or multi-strand sprockets up to 48" in diameter.


No. 50 - 5/8" Pitch

Roller Chain Sprocket No. 50

Type B

No. Teeth Sprocket No. Max. Bore^^ Outside Dia. Hub Style
Dia. LTB
9 50B9 11/16 2.092 1-3/8* 1 S
10 50B10 7/8 2.299 1-19/32* 1 S
11 50B11 1 2.504 1-25/32* 1 S
12 50B12 1-1/8 2.708 2* 1 S
13 50B13 1-5/16 2.911 2-3/16* 1 S
14 50B14 1-7/16 3.114 2-1/8 1 S
15 50B15 1-5/8 3.316 2-1/4 1 S
16 50B16 1-3/4 3.517 2-1/2 1 S
17 50B17 1-7/8 3.719 2-11/16 1 S
18 50B18 2-1/16 3.919 2-7/8 1 S
19 50B19 ** 4.121 ** 1 E
20 50B20 ** 4.321 ** 1-1/8 E
21 50B21 ** 4.521 ** 1-1/8 E
22 50B22 ** 4.722 ** 1-1/8 E
23 50B23 ** 4.922 ** 1-1/8 E
24 50B24 ** 5.123 ** 1-1/8 E
25 50B25 ** 5.323 ** 1-1/8 E
26 50B26 ** 5.523 ** 1-1/8 E
27 50B27 ** 5.723 ** 1-1/8 E
28 50B28 ** 5.922 ** 1-1/8 E
29 50B29 ** 6.122 ** 1-1/8 E
30 50B30 ** 6.321 ** 1-1/8 E
31 50B31 ** 6.521 ** 1-1/8 E
32 50B32 ** 6.721 ** 1-1/8 E
33 50B33 ** 6.920 ** 1-1/8 E
34 50B34 ** 7.120 ** 1-1/8 E
35 50B35 ** 7.319 ** 1-1/8 E
36 50B36 ** 7.519 ** 1-1/8 E
37 50B37 ** 7.718 ** 1-1/8 E
38 50B38 ** 7.918 ** 1-1/8 E
39 50B39 ** 8.117 ** 1-1/8 E
40 50B40 ** 8.316 ** 1-5/16 E
41 50B41 ** 8.516 ** 1-5/16 E
42 50B42 ** 8.715 ** 1-5/16 E
43 50B43 ** 8.914 ** 1-5/16 E
44 50B44 ** 9.114 ** 1-5/16 E
45 50B45 ** 9.313 ** 1-5/16 E
48 50B48 ** 9.911 ** 1-5/16 E
50 50B50 ** 10.309 ** 1-5/16 E
52 50B52 ** 10.708 ** 1-5/16 E
54 50B54 ** 11.106 ** 1-5/16 E
60 50B60 ** 12.306 ** 1-5/16 E
65 50B65 ** 13.296 ** 1-5/16 E
70 50B70 ** 14.292 ** 1-5/16 E
72 50B72 ** 14.690 ** 1-5/16 E
80 50B80 ** 16.283 ** 1-5/16 E
84 50B84 ** 17.079 ** 1-5/16 E
96 50B96 ** 19.466 ** 1-5/16 E

* Has recessed groove in hub for chain clearance. 
^^Maximum bore sizes shown allow for standard keyway and set screw over keyway. Slightly larger bores are available with no keyway, shallow keyway, or setscrew at 90 degrees to keyway.
** Hub O.D. to be determined by bore size and chain clearance.

Chain Data
Size #50
Pitch 5/8"
Roller Width 3/8"
Roller Diameter .400

Sprockets can be quoted in various bore sizes or styles with non standard or timed keyways and hardened teeth (hardness will be Rockwell “C” 35-45). Bore sizes and hub diameters larger than the standards specified are available. Specify requirements when quoting or ordering. Welded construction (Style E) sprockets can be produced as solid construction. We can manufacture any of the sizes shown as multi-strand sprockets, or we have tooling to make larger single or multi-strand sprockets up to 48" in diameter.


No. 60 - 3/4" Pitch

Roller Chain Sprocket No. 60

Type B

No. Teeth Sprocket No. Max. Bore^^ Outside Dia. Hub Style
Dia. LTB
9 60B9 7/8 2.510 1-11/16* 1-1/4 S
10 60B10 1 2.759 1-15/16* 1-1/4 S
11 60B11 1-1/4 3.005 2-1/8* 1-1/4 S
12 60B12 1-3/8 3.249 2-3/8* 1-1/4 S
13 60B13 1-1/2 3.493 2-1/4 1-1/4 S
14 60B14 1-3/4 3.736 2-1/2 1-1/4 S
15 60B15 1-15/16 3.979 2-5/8 1-1/4 S
16 60B16 ** 4.220 ** 1-7/16 E
17 60B17 ** 4.463 ** 1-7/16 E
18 60B18 ** 4.703 ** 1-7/16 E
19 60B19 ** 4.945 ** 1-7/16 E
20 60B20 ** 5.186 ** 1-7/16 E
21 60B21 ** 5.426 ** 1-7/16 E
22 60B22 ** 5.666 ** 1-7/16 E
23 60B23 ** 5.906 ** 1-7/16 E
24 60B24 ** 6.147 ** 1-7/16 E
25 60B25 ** 6.387 ** 1-7/16 E
26 60B26 ** 6.627 ** 1-7/16 E
27 60B27 ** 6.867 ** 1-7/16 E
28 60B28 ** 7.106 ** 1-7/16 E
29 60B29 ** 7.346 ** 1-7/16 E
30 60B30 ** 7.586 ** 1-7/16 E
31 60B31 ** 7.826 ** 1-7/16 E
32 60B32 ** 8.065 ** 1-7/16 E
33 60B33 ** 8.304 ** 1-7/16 E
34 60B34 ** 8.544 ** 1-7/16 E
35 60B35 ** 8.783 ** 1-7/16 E
36 60B36 ** 9.023 ** 1-7/16 E
38 60B38 ** 9.501 ** 1-7/16 E
39 60B39 ** 9.740 ** 1-7/16 E
40 60B40 ** 9.980 ** 1-7/16 E
41 60B41 ** 10.219 ** 1-7/16 E
42 60B42 ** 10.458 ** 1-7/16 E
45 60B45 ** 11.176 ** 1-7/16 E
48 60B48 ** 11.893 ** 1-7/16 E
50 60B50 ** 12.371 ** 1-7/16 E
54 60B54 ** 13.327 ** 1-7/16 E
60 60B60 ** 14.761 ** 1-7/16 E
72 60B72 ** 17.928 ** 1-7/16 E
80 60B80 ** 19.539 ** 1-7/16 E

* Has recessed groove in hub for chain clearance. 
^^Maximum bore sizes shown allow for standard keyway and set screw over keyway. Slightly larger bores are available with no keyway, shallow keyway, or setscrew at 90 degrees to keyway.
** Hub O.D. to be determined by bore size and chain clearance.

Chain Data
Size #60
Pitch 3/4"
Roller Width 1/2"
Roller Diameter .469

Sprockets can be quoted in various bore sizes or styles with non standard or timed keyways and hardened teeth (hardness will be Rockwell “C” 35-45). Bore sizes and hub diameters larger than the standards specified are available. Specify requirements when quoting or ordering. Welded construction (Style E) sprockets can be produced as solid construction. We can manufacture any of the sizes shown as multi-strand sprockets, or we have tooling to make larger single or multi-strand sprockets up to 48" in diameter.


No. 80 - 1" Pitch

Roller Chain Sprocket No. 80

Type B

No. Teeth Sprocket No. Max. Bore^^ Outside Dia. Hub Style
Dia. LTB
9 80B9 1-3/16 3.347 2-1/8* 1-5/8 S
10 80B10 1-5/16 3.678 2-1/2* 1-5/8 S
11 80B11 1-5/8 4.000 2-7/8* 1-5/8 S
12 80B12 ** 4.332 ** 1-1/2 E
13 80B13 ** 4.657 ** 1-1/2 E
14 80B14 ** 4.982 ** 1-1/2 E
15 80B15 ** 5.305 ** 1-1/2 E
16 80B16 ** 5.627 ** 1-1/2 E
17 80B17 ** 5.950 ** 1-1/2 E
18 80B18 ** 6.271 ** 1-1/2 E
19 80B19 ** 6.593 ** 1-1/2 E
20 80B20 ** 6.914 ** 1-1/2 E
21 80B21 ** 7.235 ** 1-1/2 E
22 80B22 ** 7.555 ** 1-1/2 E
23 80B23 ** 7.875 ** 1-1/2 E
24 80B24 ** 8.196 ** 1-1/2 E
25 80B25 ** 8.516 ** 1-9/16 E
26 80B26 ** 8.836 ** 1-9/16 E
27 80B27 ** 9.156 ** 1-9/16 E
28 80B28 ** 9.475 ** 1-9/16 E
29 80B29 ** 9.795 ** 1-9/16 E
30 80B30 ** 10.114 ** 1-9/16 E
32 80B32 ** 10.753 ** 1-9/16 E
33 80B33 ** 11.072 ** 1-9/16 E
34 80B34 ** 11.392 ** 1-9/16 E
35 80B35 ** 11.711 ** 1-9/16 E
36 80B36 ** 12.030 ** 1-9/16 E
40 80B40 ** 13.306 ** 1-9/16 E
45 80B45 ** 14.901 ** 1-9/16 E
48 80B48 ** 15.857 ** 1-9/16 E
60 80B60 ** 19.681 ** 1-3/4 E

* Has recessed groove in hub for chain clearance. 
^^Maximum bore sizes shown allow for standard keyway and set screw over keyway. Slightly larger bores are available with no keyway, shallow keyway, or setscrew at 90 degrees to keyway.
** Hub O.D. to be determined by bore size and chain clearance.

Chain Data
Size #80
Pitch 1"
Roller Width 5/8"
Roller Diameter .625

Sprockets can be quoted in various bore sizes or styles with non standard or timed keyways and hardened teeth (hardness will be Rockwell “C” 35-45). Bore sizes and hub diameters larger than the standards specified are available. Specify requirements when quoting or ordering. Welded construction (Style E) sprockets can be produced as solid construction. We can manufacture any of the sizes shown as multi-strand sprockets, or we have tooling to make larger single or multi-strand sprockets up to 48" in diameter.


No. 100 - 1-1/4"

Roller Chain Sprocket No. 100

Type B

No. Teeth Sprocket No. Max. Bore^^ Outside Dia. Hub Style
Dia. LTB
8 100B8 1-3/16 3.768 1-3/4 1-1/2 S
9 100B9 1-3/8 4.184 2-1/8 1-1/2 S
10 100B10 ** 4.598 ** 1-1/2 E
11 100B11 ** 5.008 ** 1-1/2 E
12 100B12 ** 5.415 ** 1-1/2 E
13 100B13 ** 5.821 ** 1-1/2 E
14 100B14 ** 6.228 ** 1-7/8 E
15 100B15 ** 6.631 ** 1-7/8 E
16 100B16 ** 7.034 ** 1-7/8 E
17 100B17 ** 7.438 ** 1-7/8 E
18 100B18 ** 7.839 ** 1-7/8 E
19 100B19 ** 8.241 ** 1-7/8 E
20 100B20 ** 8.643 ** 1-7/8 E
21 100B21 ** 9.044 ** 1-7/8 E
22 100B22 ** 9.444 ** 1-7/8 E
23 100B23 ** 9.844 ** 1-7/8 E
24 100B24 ** 10.245 ** 1-7/8 E
25 100B25 ** 10.645 ** 1-7/8 E
26 100B26 ** 11.045 ** 1-7/8 E
28 100B28 ** 11.844 ** 1-7/8 E
30 100B30 ** 12.643 ** 1-7/8 E
32 100B32 ** 13.441 ** 1-7/8 E
35 100B35 ** 14.639 ** 1-7/8 E
36 100B36 ** 15.040 ** 1-7/8 E

* Has recessed groove in hub for chain clearance. 
^^Maximum bore sizes shown allow for standard keyway and set screw over keyway. Slightly larger bores are available with no keyway, shallow keyway, or setscrew at 90 degrees to keyway.
** Hub O.D. to be determined by bore size and chain clearance.

Chain Data
Size #100
Pitch 1-1/4"
Roller Width 3/4"
Roller Diameter .750

Sprockets can be quoted in various bore sizes or styles with non standard or timed keyways and hardened teeth (hardness will be Rockwell “C” 35-45). Bore sizes and hub diameters larger than the standards specified are available. Specify requirements when quoting or ordering. Welded construction (Style E) sprockets can be produced as solid construction. We can manufacture any of the sizes shown as multi-strand sprockets, or we have tooling to make larger single or multi-strand sprockets up to 48" in diameter.

We have tooling to produce larger pitch sprockets also. Send your inquires for #120, #140, #160, #180 and #200 chain sprockets. We can supply single or multi-strand sprockets up to 48’’ in Diameter.

Manufactured in the USA by G&G Manufacturing Company.