Ready Made PTO Drivelines
Complete PTO Drivelines
Warning!
Portions marked 
of this driveline are not guarded. The machine manufacturer is responsible for providing guarding.
Complete PTO Drivelines are available from stock with Safety Orange Plastic Guards. Black Plastic Guards are available by Quotation. Dimension M is 1-3/8 x 6 Spline Snap Hitch. Dimension L is 48" and Dimension N is available in a variety of round bore sizes with standard keyway and setscrew. Order by Stock Number.
| Stock No. | Series No. | Dim. N | Wt. Lbs. |
| 306-4816 | 6N | 1" Rd. | 20.00 |
| 306-4818 | 6N | 1-1/8" Rd. | 20.00 |
| 306-4820 | 6N | 1-1/4" Rd. | 20.00 |
| 312-4816 | 12N | 1" Rd. | 29.00 |
| 312-4818 | 12N | 1-1/8" Rd. | 29.00 |
| 312-4820 | 12N | 1-1/4" Rd. | 29.00 |
| 314-4818 | 14N | 1-1/8" Rd. | 29.00 |
| 314-4820 | 14N | 1-1/4" Rd. | 29.00 |
| 314-4822 | 14N | 1-3/8" Rd. | 29.00 |
| 314-4824 | 14N | 1-1/2" Rd. | 29.00 |
| 335-4820 | 35N | 1-1/4" Rd. | 38.00 |
| 335-4822 | 35N | 1-3/8" Rd. | 38.00 |
| 335-4824 | 35N | 1-1/2" Rd. | 38.00 |
| 344-4824 | 44R | 1-1/2" Rd. | 56.00 |
| 355-4824 | 55N | 1-1/2" Rd. | 67.00 |
Warning!
Portions marked of this driveline are not guarded. The machine manufacturer is responsible for providing guarding.
CAUTION!
For maximum safety and smoothest operation, keep PTO Shaft in a closed position while under load. Keep U-Joint angles equal. Recommended not to exceed 15 degree offset on each U-Joint.
ALWAYS REPLACE SAFETY GUARDS.
PTO Drivelines Less Implement End Yoke
Warning!
Portions marked of this driveline are not guarded. The machine manufacturer is responsible for providing guarding.
PTO Drivelines Less Implement End Yoke are furnished without center cross or end yoke on implement end. Order center cross and end yoke as required. When center cross and end yoke are installed, the overall length of the PTO will be 48". Safety Orange Plastic Guards are furnished.
| Stock No. | Series No. | Wt. Lbs. |
| 305-0648 | 6N | 18.00 |
| 305-1248 | 12N | 26.00 |
| 305-1448 | 14N | 28.04 |
| 305-3548 | 35N | 33.04 |
| 305-4448 | 44R | 48.31 |
| 305-5548 | 55N | 52.10 |
Warning!
Portions marked of this driveline are not guarded. The machine manufacturer is responsible for providing guarding.
ALWAYS REPLACE SAFETY GUARDS.
Manufactured in the USA by G&G Manufacturing Company.